R&G Frame Sliders - Installation Guide2

[FrankoQ]

Finally got mine done. A few comments and pics of my install.

what comes with the package:

for more details, see the original install guide:

remove left and right fairings.

replace coolant bottle and install it.

remove engine rod and push new one in.

new rod going in:

Old one coming out:

It should look like this:

Now to the scary part. making holes on the fairings. I used plumber's putty. :)

this helped me know exactly where to start the holes. used a small drill bit for initial hole. then moved to larger bit and ended up using a dremmel for the rest.

That's it. most of the time is spent making those holes big enough for the spacers to go thru.

[Metallican525]

Eeeeeeexxactly. Well put, pretty straitforward and simple install right? I like the plumbers putty idea better than paint like I used, good thinkin!!