Primo Posted January 9, 2012 Share Posted January 9, 2012 Hey everyone, I have a 2000 VFR and decided to change the gauge faces for the tach and speedometer. To do this I needed to remove the needles from the gauges. So, all went well until I put the needles back on. First of all, I had no idea how to line them up properly. After some tweaking, it looks like the tach needle is pretty close but I cannot even get the speedometer needle to move. I have the bike on the center stand in first gear and when rolling on the throttle the needle for the speedometer does not move at all. I must have had the needle off and on 50 different times. Sometimes it won't fall back to zero so i move it but it does not seem to be affected at all by the throttle. Did I mess something up? Is there a "correct" way to do this? Thanks ahead of time, Primo Quote Link to comment Share on other sites More sharing options...
Primo Posted January 10, 2012 Author Share Posted January 10, 2012 *bump* Quote Link to comment Share on other sites More sharing options...
Guest JeffLaurence Posted January 10, 2012 Share Posted January 10, 2012 Electrical connection? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.