sammyt Posted October 23, 2024 Posted October 23, 2024 The plug that connects my stator to my regulator rectifier burnt up... (3 yellow wires) I just bought a new stator a month ago, it has been working fine, but then I smelt something burning on my bike. I checked the wiring harness and the connection from the stator to the R/R is burnt on one prong. (again, 3 yellow wires) I checked the stator continuity and they are all 0.7 ohms between the 3 wires. They are not grounding out on the bike at all. Should I hardwire the stator to the R/R or buy a new connection? If I hardwire it, does it matter which yellow wires I connect from the stator side to the R/R side? Quote
gropula Posted October 23, 2024 Posted October 23, 2024 Hardwire it and upgrade the regulator rectifier to sh847. Quote
Member Contributer Grum Posted October 23, 2024 Member Contributer Posted October 23, 2024 7 hours ago, sammyt said: If I hardwire it, does it matter which yellow wires I connect from the stator side to the R/R side? No, doesn't matter. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.