wawasonqo Posted March 22, 2023 Share Posted March 22, 2023 Hi Folks, Well, I've removed the Master Cylinder but I think it's stuffed. I can't remove the push rod, master piston and spring from the cylinder. The attached photo shows the Top Port is blocked. Any ideas for removal? I can't push and I can't pull. Quickest solution would probably be to get a 2nd hand M.C. that will work with the VFR like the CBR600F4 one. The following solutions are available. Honda VFR 800 Fi-1 01 Brake Master Cylinder Repair Kit £ 42.00 (Excl. VAT £35) 42.81 US Dollars https://www.wemoto.com/bikes/honda/vfr_800_fi-1/01/picture/brake_master_cylinder_repair_kit_-_rear Used Honda Brake Master Cylinder Rear CBR 600 F 2001-2006 (CBR600F CBR600F4i PC35) $US 32.32 https://www.baboon.eu/en/parts/mke=honda/mdl=cbr+600+f+2001+2006+cbr600f+cbr600f4i+pc35/cat=brakes+components/prt=brake-master-cylinder-rear Used Honda Brake Master Cylinder Rear VFR 800 FI 1998-2001 $US 32.32 https://www.baboon.eu/en/parts/mke=honda/mdl=vfr+800+fi+1998+2001+vfr800fi+rc46/prt=brake-master-cylinder-rear If your VFR Master Cylinder is functioning correctly, what distance should you be able to move the piston up and down? Thanks! Link to comment Share on other sites More sharing options...
Member Contributer Grum Posted March 22, 2023 Member Contributer Share Posted March 22, 2023 Did you remove the circlip/snap ring that locks the piston assy in place? Link to comment Share on other sites More sharing options...
wawasonqo Posted March 22, 2023 Author Share Posted March 22, 2023 Just now, Grum said: Did you remove the circlip/snap ring that locks the piston assy in place? Yep mate 🙂 I've added some more info to my original post. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.