VFR4CMB Posted August 2, 2022 Share Posted August 2, 2022 Did a few vfrdiscussion site searches but could only find info on Givi and one had a baby in the trunk. I am looking for the one on the attached picture for my 01'. Any idea who makes or made it? Not looking for a full system just somewhere to store my hat, ear plugs and small stuff. Link to comment Share on other sites More sharing options...
Member Contributer VifferJ Posted August 2, 2022 Member Contributer Share Posted August 2, 2022 Looks like a Corbin smuggler trunk Link to comment Share on other sites More sharing options...
VFR4CMB Posted August 2, 2022 Author Share Posted August 2, 2022 20 minutes ago, VifferJ said: Looks like a Corbin smuggler trunk Thanks. I saw the seat tag and went to Corbin Site but it wasn't there so figured it might be another MFG. I'll keep researching. Link to comment Share on other sites More sharing options...
Member Contributer Tirso Posted August 2, 2022 Member Contributer Share Posted August 2, 2022 it's a corbin smuggle they also sold beetle bags. neither cheap. here's a video of both Corbin Smuggler 2001 VFR800 Link to comment Share on other sites More sharing options...
Ghostrider Posted August 2, 2022 Share Posted August 2, 2022 Yep, Corbin Smuggler. Hideously expensive and as rare as unicorn tears. I made my own out of an old spare seat (albeit for a Gen4 but the principle's the same)... 🙂 Link to comment Share on other sites More sharing options...
Member Contributer interceptor69 Posted August 3, 2022 Member Contributer Share Posted August 3, 2022 I bought one of those years ago and the paint was so mismatched and its fitting so poor I immediately returned it. Link to comment Share on other sites More sharing options...
Member Contributer JZH Posted August 17, 2022 Member Contributer Share Posted August 17, 2022 On 8/2/2022 at 11:10 PM, Ghostrider said: Yep, Corbin Smuggler. Hideously expensive and as rare as unicorn tears. I made my own out of an old spare seat (albeit for a Gen4 but the principle's the same)... 🙂 That looks really nice--well done! Can you tell us more about how you did it? I had tossed around the same idea in my head for years, but never attempted it. I'm especially interested in the hinges... Many years ago I found a yellow Smuggler for my Y2k in California, but I ended up only using the seat, with the OEM cowl. But I need a 6mm Allen key to open it! Cheers, JZH Link to comment Share on other sites More sharing options...
Ghostrider Posted September 19, 2022 Share Posted September 19, 2022 It was really quite simple. The seat hump pivots on its locating tabs into the rear fairing and is still secured by the Frankenstein bolts. To allow entry, the slot that the seat hump locating tabs normally fit into, were elongated towards the tank. Another slot was cut into the rear of the fairing to allow a simple, generic lock to fix into. Link to comment Share on other sites More sharing options...
Member Contributer Terry Posted September 20, 2022 Member Contributer Share Posted September 20, 2022 That's awesome. I have a Sargent seat that is two piece and the area below the cowl is vacant. I'm just not sure I can bear to cut into pristine plastic... Link to comment Share on other sites More sharing options...
Member Contributer JZH Posted September 20, 2022 Member Contributer Share Posted September 20, 2022 On 9/19/2022 at 10:59 PM, Ghostrider said: It was really quite simple. The seat hump pivots on its locating tabs into the rear fairing and is still secured by the Frankenstein bolts. To allow entry, the slot that the seat hump locating tabs normally fit into, were elongated towards the tank. Another slot was cut into the rear of the fairing to allow a simple, generic lock to fix into. Awesome, thanks! Very straightforward. How far does the cowl open? Ciao, JZH Link to comment Share on other sites More sharing options...
Ghostrider Posted October 7, 2022 Share Posted October 7, 2022 On 9/21/2022 at 12:36 AM, JZH said: Awesome, thanks! Very straightforward. How far does the cowl open? Ciao, JZH Wide enough to get stuff in, if that doesn't sound too flippant. I can easily get my DSLR in there, waterproofs, bottle of water/snacks. It really wouldn't be difficult to mod it to open wider... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.