Member Contributer Skids Posted July 21, 2022 Member Contributer Share Posted July 21, 2022 I love the OEM quickshifter on my VFR800X and would like one on my 5th Gen. Healtech do one. Does anyone have any experience with this on the 5th Gen? Insights, fitting etc would be appreciated. Link to comment Share on other sites More sharing options...
Member Contributer raYzerman Posted July 21, 2022 Member Contributer Share Posted July 21, 2022 No, but I think you should buy another VFR800X and ship it over here. I'll store it for you, make sure there's no rust gets on the cylinder walls. Link to comment Share on other sites More sharing options...
Member Contributer bmart Posted July 21, 2022 Member Contributer Share Posted July 21, 2022 I can't speak to that brand, but we see QS failures with regularity at track days. I prefer to do it all manually anyway. Good luck and let us know how it goes! Link to comment Share on other sites More sharing options...
Member Contributer Mohawk Posted July 22, 2022 Member Contributer Share Posted July 22, 2022 The healtech works well, takes a bit of setting up. I have one on another bike & intend to swap it on to my 5th Gen, but I need to make a custom harness because I converted it to stick coils. Link to comment Share on other sites More sharing options...
Member Contributer Skids Posted March 7, 2023 Author Member Contributer Share Posted March 7, 2023 On 7/22/2022 at 1:41 PM, Mohawk said: The healtech works well, takes a bit of setting up. I have one on another bike & intend to swap it on to my 5th Gen, but I need to make a custom harness because I converted it to stick coils. Just contacted Healtech as there was no Supplementary Manual for installation. They sent me a copy and it looks like you have to break into the ignition circuit at the coils. F that for a game of soldiers! That's a very good way to f up my bike. Shame, I'd love a QS on the Fi. Link to comment Share on other sites More sharing options...
VFR750F3 Posted March 8, 2023 Share Posted March 8, 2023 I have one available for a power commander 3 mite works with 5 available with software. It is a PULL reverse shift. I used it with my Sato rear sets until I purchased a Rapid Bike. Link to comment Share on other sites More sharing options...
Member Contributer Skids Posted March 8, 2023 Author Member Contributer Share Posted March 8, 2023 2 hours ago, VFR750F3 said: I have one available for a power commander 3 mite works with 5 available with software. It is a PULL reverse shift. I used it with my Sato rear sets until I purchased a Rapid Bike. That's kind but I don't have a PC. Link to comment Share on other sites More sharing options...
Question
Skids
I love the OEM quickshifter on my VFR800X and would like one on my 5th Gen.
Healtech do one.
Does anyone have any experience with this on the 5th Gen? Insights, fitting etc would be appreciated.
Link to comment
Share on other sites
6 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.