makenzie71 Posted June 5, 2022 Share Posted June 5, 2022 Carburetors have been sold, shipped, and delivered. All items are in Lubbock, TX. I only accept checks or paypal friends and family payments. Frame is straight and clean but does not have a title. I will provide a Vermont accepted bill of sale. $100+shipping I do not know the last time the motor ran. It turns over cleanly without any noise, has lots of compression. I'm confident it'll be a decent motor but I have never heard it run. Does not have any external damage and does not look abused. Bike was parked because a previous owner wrecked it and never got back on. All of the electronics shown have been removed and sold already. $125+shipping Carburetors need a good cleaning, but they're not gunked up. Bowls everything were pretty clean but they were left open in a dusty environment. The slides move freely but you can feel the grit. The butterflies move smoothly. I do have the whole assembly soaked in penetrating oil. I've taken the caps off and the diaphragms all look to be in good shape but one of the caps has a suspicious crack in it that might warrant replacing...or a dab of JB Weld. Two of the velocity stacks are in good shape, two of them are pretty buggered up. There are no pilot, needle, or air jets...the plan was to rebuild them to stock but I'm getting there. If I got the jet sizes you need I can put them in for $5/ea, or cost at the dealership if I don't, but odds are you're going to want your own sizes. $115 shipped to the continental US. I recommend using Fastenal for shipping the frame or motor and I can pallet and deliver them to a local store...it's usually $75~100 for these kinds of things. $250 + shipping if you buy the lot. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.