Jump to content
  • 0

Autotuning


Alvinvfr800

Question

4 answers to this question

Recommended Posts

  • Member Contributer

What are you trying to accomplish? 

 

Admittedly, I've sold most of the PC units that have come on bikes I've bought over the years. 

Link to comment
Share on other sites

  • Member Contributer

If "autotuning capability" is what you mean, Rapidbike for the win! 😁 I haven't messed with mine since I installed it and the lean/surge closed loop behavior has never returned.  I don't think any stripe of Power Commander will do real time monitoring and correction like RB will.

Link to comment
Share on other sites

  • Member Contributer

Agreed on RB.  It auto adjusts on the fly,  whereas PC must be manually adjusted after capturing data then done again until the desired result is obtained. I did have some RB / MTB trouble  - there was some slight surging around 5,000 rpm.  I later found that the cable from the wideband sensor was melting against one of the rear primary header tubes (and I suppose grounding) so hoping that repairing that and keeping it out of the way will get things dialed in. 

Link to comment
Share on other sites

  • Member Contributer

I switched from 10% ethanol fuel to 100% petrol and it took the RB less than 50 miles to alter the fuelling to take advantage of the improved fuel efficiency 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.