FireWire Posted October 30, 2021 Share Posted October 30, 2021 The assembly is bolted to the frame with four bolts, two are 8mm hex and two are 4mm hex. I cannot seem to find those specs and I don't happen to have a manual. I took a spill making a right hand turn going about four or five mph. The results were a chipped and bent brake pedal. I have the replacement pedal but need to remove the foot peg assembly to replace the brake pedal which is mounted on the back side of the foot peg assembly. I called a Honda dealership and they were less than helpful. Since these are aluminum parts I run the risk of over tightening and stripping the bolt head and/or making it nearly impossible to remove the assembly in the future if necessary. I plan on adding a small amount of anti-seize paste on the bolt threads but I'd rather have those specs. Thanks! Link to comment Share on other sites More sharing options...
Member Contributer Skids Posted October 30, 2021 Member Contributer Share Posted October 30, 2021 6th Gen Service Manual download. It should be in there somewhere. I've had a quick look but can't find it but I'm sure someone will know where it is. Link to comment Share on other sites More sharing options...
jstehman Posted October 31, 2021 Share Posted October 31, 2021 Found it.Section 15-2 in the SMSent from my SM-N950U using Tapatalk Link to comment Share on other sites More sharing options...
Member Contributer Skids Posted November 1, 2021 Member Contributer Share Posted November 1, 2021 My pleasure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.