Jump to content

Power Commander Maps

Fueling Maps for use with Powercomander Moduals

48 files

  1. Coderighter new, Rev 3 Map. Note some changes in bike setup.

    It's been a while, sorry. I added a vacuum switch to disable Autotune during deceleration. The disabling during deceleration prevents the Autotune from trying to correct the mixture while the bike's EMU is trying to lean it for coast. The Autotune will try to "fix-it" wasting fuel and screwing up the trim map until the next time you hit the corresponding cells.
    I have disconnected the Evap. since the last update.
    Jon

    175 downloads

    0 comments

    Updated

  2. Cozeys map PC3 non usb

    Cozeys map for non usb model power commander 3. Every other line taken out to work with rpm change every 500 rpms instead of every 250 rpms as with PC3 usb model. For some reason it would not let me use the .map file extension so I just picked another one that it would let me load. I think you can just change it manually from .mov to .map and it should work fine.

    65 downloads

    0 comments

    Updated

  3. Cozye's Map Modified for an 06+ VTEC

    I just modded Cozye's PC3 map and ran it on my '06, pretty impressive power gains with gas milage savings at highway speeds to boot. VTEC is pretty smooth too. I'm going to run it for a while to see how it does. If anyone else decides to run it let me know how it does for you.

    680 downloads

    10 comments

    Updated

  4. Cozye's Map PCIII NON-USB

    Here is a version of Cozye's map converted to run on a nonUSB PCIII.
    Because Cozye's map has adjustments for every 250 RPM, and nonUSB PCIII only has ever 500 RPM, I made a few minor tweaks, usually only 1 % richer to try to get the same AFR between 500 RPM marks, but for the most part, it's just the same numbers copy-pasted over into the different format.
    This is for the 2002-2005 models.

    146 downloads

    0 comments

    Updated

  5. Dyno custom map for torque

    This map came loaded in my new to me 2003 VFR800. The guy who had the bike before the girl I bought the bike from had it dyno'd to his specs with a LeoVince and K&N air filter setup. This is pretty torqued for me (I am also new to sport/touring bikes). I loaded in the generic LeoVince map from the power commander site and that one is a little gentler to me, but I wanted to contribute something to the community. Let me know if you like it. I don't think this map is used for gas mileage.

    131 downloads

    2 comments

    Submitted

  6. Graphic comparison of Coderighter's map vs Dynojet PCV stock map

    As my first contribution to this outstanding forum I put together an excel based analysis, or rather cross-comparison, of the Dynojet PCV stock map for 2006 VFR800 ABS and Coderighter's map generated by Auto Tune (if I understood correctly). The motive for such an endeavor was the fact that I am a lucky owner of black 2006 VFR800 ABS anxiously expecting his PCV to come in mail in about a week's time, on top of that I am a finance guy - hence excel spreadsheets with funny graphs.
    On the topic, I laid out Coderighter's maps for every gear in one tab (along with graphs of values for every gear) and Dyno stock in another tab (six copies since Dyno uses single map for all gears), the third tab contains the tables of differences between the two maps.
    My personal observation sort of supports real life experience of folks that used Coderighter's maps with much success, especially in respect of two aspects: 1)lower overall fuel consumption (Coderighter has somewhat leaner maps, or so it seems from comparison tables), 2) smoother Vtec over the whole RPM range without sharp surges at 6500 RPM. I am yet to try the map for real but you can bet that I will. Love the results on graph. Someone mentioned surges at 3000RPM, that sort of shows through on the graphs, slightly richer values, that could have differing implications for every bike, so not sure how that translates into a surge.
    Many thanks to Coderighter, I follow your threads with much dedication, and Cozye for his early inputs that live on.
    PS: To view the file change the extension from *.doc to *.xls, I couldn't upload the file in its original form nor as a zip archive (got unsupported standard message).

    120 downloads

    0 comments

    Updated

  7. M16-005-004 - Dynojet Leo&Vince Map

    This is the missing map from Dynojet's website for the PCV.
    2006+
    Leo & Vince aftermarket slip ons
    Power Commander 5
    Aftermarket or stock air filter
    Dynojet 02 Eliminators

    237 downloads

    4 comments

    Updated

  8. Modified Cozy_ver5 for PCV

    I took Cozy's ver_5 PCIII map (.djm) and copied it over to work on a PCV (.pvm). The only difference is the PCV has a 15% throttle were the PCIII does not. I just took an average between the 10% and 20% throttles for this column and it seems to work well. See Cozy ver_5 original description for more info.
    I have an 02 VFR with BMC air-filter, O2 eliminators, PAIR mod and gutted stock exhaust (cat still in place). I have to say this map is excellent. Low rpm performance (under 3000) is much cleaner and throttle is more responsive. At partial throttle (under 50%), there is practically no VTEC transition. This map should work well for the 02 - 05 models but might be a little rich for stock exhaust.
    The only area I see that could use a little improvement seems to be the VTEC transition at large throttle openings (more than 50%). The transition is noticeable but no where near as bad as stock.
    tdmp

    431 downloads

    4 comments

    Updated

  9. Modified Cozye PC3 USB Map (2004 VFR)

    Since I seemed to be able to improve some areas of the mapping for my particular bike, I thought I would upload the map and make a few comments.
    1. I really don't know what I am doing
    2. If I can do it, anyone can
    3. I figured the only way I could actually damage the motor was by leaning things out and it seemed like the areas I wanted to work on needed more fuel, not less. I figured that would only hurt economy which it did, but only a small amount. Probably less than 5%.
    4. Bike is a 2004, stock exhaust, K&N, PAIR valves and Flapper valve disabled. Snorkle in place.

    141 downloads

    0 comments

    Submitted

  10. OFFICIAL COZY MAP - (cozye_ver5.djm) - Famous vtec pc3 USB map.

    Thanks a million to HS for setting up this downloads section. Well, here is my map for everyone to download. This is the same map that is featured in Motorcyclist Magazine (May,07 pg 159).
    This map should work perfectly on any 2002-2005 VFR with aftermarket slip on and o2 eliminators. It will work well on any vtec really, regardless of exhaust. If running stock exhaust you may want to go in and lean it up just a touch. Try it first though and see before tweaking. If anyone feels like they can make some improvements, go for it. Many minds are greater than one.
    I believe Tinyminds has dyno'd this map and got around 101 hp or so.
    This map wont work well on 2006-2007 models with the lower vtec engagement. You could probably take the map and modify it accordingly for the lower vtec range. If someone attempts this, please post it up for other newer vtec guys to use. I've had quite a few 06-07 owners ask for it. My thoughts are that you could copy mine below 6000, and above 8000. Then just mimick what I did with the fuel curve on the dynojet supplied version from 6000-8000. Just smooth out the fuel curve.
    enough rambling.
    One request however. If you use the map, and you really like it. Why not make a small donation to VFRD ? I would guess there are probably 150 people who have or are using this map (just going by the fact that I have had about 300 request for it). If all those people chipped in 5 bucks, it would be quite a bit of dough to go for our wonderful community. Just a thought. :thumbsup:

    1,272 downloads

    6 comments

    Updated

  11. Old Power Commander 2/3 Stuff

    This is a recovery of an old PCII directory from long ago when I had one on my VFR. I believe there is software in it to edit both the PCII and PCIII maps. I no longer have either of those to test it out, but the programs open map files and such. The biggest pain was finding a USB->COM port adapter for the laptop, alternatively I remember being able to remove the PCII from the bike and hook it up to a desktop with a com port with a 9V battery to power the PCII.
    I didn't check, but I _think_ all the old PCII maps (excluding California) uploaded by Miguel are in this zip file.
    Just putting this out there because someone was looking for it.

    148 downloads

    1 comment

    Submitted

  12. PC111 usb 2002-2005 Vtec Australian / Euro. Modded Cozye map

    Map for 2002 Vtec Aust / Euro with Staintunes, o2 elim, K&N filter, Cat converter drilled (gutted)
    Based on Cozye's map for PC111 usb, but tweaked for AU. on Dyno.

    135 downloads

    2 comments

    Updated

  13. pc3 usb map

    mods:
    motad headers
    2 bros exhaust
    bmc filter
    no flapper or snorkel, pair valves
    modified velocity stacks

    81 downloads

    4 comments

    Submitted

  14. PC3 USB Staintune 1998-2001 5th gen European map

    This is a direct transcription of the pc2 files posted at dynojet I combined the AAP tables and MP file tables from the original(map)file and converted it into a single (dmj) file table. The european staintune map is considerably leaner than the US version over the entire range of rpm and throttle postion.
    I found it has good fuel economy and smooth power delivery for my 1998 vfr high mount staintune with silencer bud and K&N filter I used this map exclusivly when I had my old PC2. I get 40-42 mpg with this map riding 70-80 mph on the highways. I went back to this map after suffering 35mpg from the us version when I upgraded from the PC2 to a PC3 usb with no noticible difference in performance, I transcribed the old european pc2 map and made this file. The leaned out areas actually remove some flat spots from OEM fuel map hard coded in the ECM of the bike.

    174 downloads

    0 comments

    Submitted

  15. PC5 on a 5th gen VFR

    Hi all, here's a map for the PC5 on a 5th gen VFR. As you can see from the pic, the air box has been hacked up pretty good. Using a PiperCross filter, Staintune hi mount, Pair's disabled and o2 sensors disabled. Runs like a batt out of Hell.
    Enjoy.

    94 downloads

    1 comment

    Updated

  16. PCV 2002-2005 catless map. 46-48mpg highway

    This map is for the 2002-2005 VFR800. mods are K&N filter snorkel mod, 1999 catless headers, stock mufflers completely gutted, and the 02 delete or optimizers. Runs very smooth and gets around 48mpg on the highway. I'm going to be checking the WOT fueling when my wideband gets here. The current 100% fuel setting is from a dyno tuner in wisconsin but I want to check it for myself. I also have the acc pump activated sensitivity 65.9  30 revs and 15% fuel.. Took it to the 1/8 mile strip with this and ran a 7.40 at 101 and that was my first time running it at the track. I will update the WOT fueling after I get the wideband. 

    122 downloads

    2 comments

    Submitted

  17. Pres day map for Power Commander 5

    This is a 6 speed map. This map has been evolving over the last few weeks. Speed Calibration was done via GPS and gear speeds were set @ 5k rpm.
    Temps range from 50* to 70* but mostly in the mid 60's. Evevation was from Sea level to 4000 feet. Average around 1500 ft.
    The trims are now at a max +/-1~3.
    In mixed riding the MPG are @ 41. Tearing it up in the hill will get as bad as 36 mpg. Straight freeway speeds can get 43 mpg.
    Most of the map is running 13.2 afr, But at 0~20% throttle in the 4250~6250 RPM range in 5&6 gears the AFR is 13.7.(I tried leaner, but the bike got back the mid range buzz, so 13.7 it is).
    Y2K with gutted airbox, PiperCross filter, Staintune and no o2/Pair.
    Enjoy.

    121 downloads

    0 comments

    Updated

  18. rhema83_pcv_at_7.19.13

    Power Commander V with Autotune module - 3 trims
    '08 VFR800A
    Leo Vince Evo II Slip On Exhaust
    K&N Air Filter
    PAIR disabled

    98 downloads

    0 comments

    Submitted

  19. Stock M111-08 map leaned out

    this is for a Leo Vince slip on, K & N air filter setup. It has been leaned out for better fuel economy. Getting mid to upper 30's mpg with this one. It's pretty nice.

    99 downloads

    1 comment

    Submitted

  20. vfr800doin.DJM

    02-05
    PC3
    Motad headers
    LEO mufflers
    BMC filter
    Flapper mod

    79 downloads

    0 comments

    Updated

  21. VFRBENNYSMAPPC3

    This is VFRBennys PC5 map for 5g vfr copied and pasted to pc3.
    His description:
    ..the air box has been hacked up pretty good. Using a PiperCross filter, Staintune hi mount, Pair's disabled and o2 sensors disabled

    97 downloads

    0 comments

    Updated

  22. VTEC 2002, EU version

    BMC Air filter
    TwoBros exhaust
    O2 elims
    If you have TWO BROS on EU model, you can try this map. There is no special map for EU model with TWOBROS shipped from PC and I had very bad transition at 7k rpm with all other EU maps and these exhausts.
    Supplied maps are too rich at 7k rpm and throttle opened at 40%-60%.
    mk

    79 downloads

    0 comments

    Updated

  23. whitepine3 pcv 02-05 map

    pcv map for 02-05 with mapping by gear. Modified maps of Cozy's and coderighter

    214 downloads

    1 comment

    Updated


×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.