Dreinert Posted May 21, 2017 Share Posted May 21, 2017 I have a 2014 VFR and am looking at picking a Power Commander V module along with the Dynojet AutoTune module as well. Has anyone installed the AutoTune module? I'm specifically wondering about the O2 sensor and what size the threads are, M18x1.5? The AutoTune comes with a sensor to that's M18x1.5 and I don't really want to drill a hole and weld a bung in place. I don't have any other performance mods but will plan on installing a K&N air filter and a IXIL L3XB slip on exhaust after intstalling the PCV & AutoTune. Any feedback or suggestions are also appreciated. Thanks! Link to comment Share on other sites More sharing options...
kamaleon Posted May 21, 2017 Share Posted May 21, 2017 I fitted same setup on a '02 .. autotune struggled at the vtec point.. allways a nasty drop. Not a good setup for this bike.. Long story short, Skip the auto tune cost and invest on a good dyno tune..Enviado desde mi iPhone utilizando Tapatalk Link to comment Share on other sites More sharing options...
Member Contributer Thumbs Posted June 14, 2017 Member Contributer Share Posted June 14, 2017 Rapid Bike module will sort that much better than a PC Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.