masterkush Posted May 5, 2017 Share Posted May 5, 2017 Hi guys :-) I have a 98 with working fuel/time console and a 'new to me' 2001 .. how hard is it to swap them over? (I know that is a pretty subjective question - so more info .. I'm an 'OK maechanic' but really crap at electrics ;-) ) I do posses an electrical testing guage and a soldering iron but should probably not be let lose with them lol Thanks, Mark Link to comment Share on other sites More sharing options...
Member Contributer MadScientist Posted May 5, 2017 Member Contributer Share Posted May 5, 2017 Not sure exactly what you are asking here - If you are swapping the whole dash, it isn't very difficult. There is a good amount of disassembly of the bike required, but swapping the dash, electrically, is a matter of unplugging a couple connectors and re-connecting them to the new dash. If you are talking about swapping just the LCD portion of the dash it gets a bit trickier, but I can try and walk you though that. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.