MarcMelrose Posted April 23, 2017 Share Posted April 23, 2017 Hello VFR family, I have a 1998 VFR800 and the 20 amp fuse keeps blowing. I had someone help me replace the harness and its still blowing the fuse. the fuel pump is not priming but I assume that is because the fuse keeps blowing. The only time the fuse does not blow is when the bank angle sensor is unplug. Ive spent a lot of money trying to fix this issue and nothing has work. This is my only means to transport to school. Any suggestions or ideas? If you need anymore detail just ask me and i'll answer the question. Link to comment Share on other sites More sharing options...
Sayo Posted April 25, 2017 Share Posted April 25, 2017 Try a 30 amp fuse until you find out what the problem is Sent from my SM-N910T3 using Tapatalk Link to comment Share on other sites More sharing options...
Auspanglish Posted April 25, 2017 Share Posted April 25, 2017 So try a known-to-be-good bank angle sensor. Hold on a minute, are you referring to the main fuse? I thought that WAS a 30A fuse. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.