cronos Posted April 22, 2017 Share Posted April 22, 2017 97 vfr Looking for help trying to take center stand out. Replacing exhaust. I see their is 1 12mm bolt lft side that holds shaft Seems like I should be able to just pull out from the left side once 12mm bolt is removed. I see on diagram their is washer on right side. How is washer on the right side of shaft dealt with? The shaft is pretty seized in so currently soaking it. Thanks in advance. Link to comment Share on other sites More sharing options...
Ghostrider Posted April 23, 2017 Share Posted April 23, 2017 Are you sure you need to remove the centre stand to replace the exhaust? I replaced mine last year and didn't take the exhaust out... Link to comment Share on other sites More sharing options...
cronos Posted April 23, 2017 Author Share Posted April 23, 2017 I welded up the pipes coming out of front cylinders awhile back. Its a tough pry to get exhaust out now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.