Member Contributer Africord Posted April 3, 2017 Member Contributer Share Posted April 3, 2017 I was intrigued by this upgrade for two reasons. First, it was in an MSTA STAReview article, and second, the experimental bike was a VFR. Anyone running this on a 6th gen? http://www.cyclopsadventuresports.com/3800-Lumen-H4-LED-Headlight-bulb-_p_83.html Link to comment Share on other sites More sharing options...
Member Contributer MaxSwell Posted April 4, 2017 Member Contributer Share Posted April 4, 2017 I installed LED headlights in my fifth gen and love them. Since they draw less power than the oem's the load on the R/R is increased. I have a VFRness and an upgraded R/R with a 3/8" aluminum heat sink (made by VFRD member mellow dude) attached between the R/R and the sub-frame to keep things cool. Link to comment Share on other sites More sharing options...
Member Contributer SamW Posted April 4, 2017 Member Contributer Share Posted April 4, 2017 I am running LEDs on my 4th Gen, same comments as above, upgraded R&R and saw about +1 volt on the voltmeter after the LED install. Don't be surprised if you have to re-aim the headlights after installing the bulb. The base/heatsink of the bulb required me to modify the spring mount and rubber boot, but I am very happy with it. Link to comment Share on other sites More sharing options...
Question
Africord
I was intrigued by this upgrade for two reasons. First, it was in an MSTA STAReview article, and second, the experimental bike was a VFR. Anyone running this on a 6th gen?
http://www.cyclopsadventuresports.com/3800-Lumen-H4-LED-Headlight-bulb-_p_83.html
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.