Member Contributer GOVFR Posted January 16, 2017 Member Contributer Share Posted January 16, 2017 Any insight on what to look for or test would be appreciated. Today the LCD COMBINATION METER decided to go blank. No clock, no fuel, no temp, no trip, no odo I stopped for gas, not long, and the combo meter came back on. I stopped a short while later and the combo meter went blank again. It came on again before I returned home, but it went blank after arrival. After a search on the forum and preparing for this post, I went out to look at the gauge and the clock was up, but showing 4:34. So I'm guessing it came back about 3 hours and 34 minutes ago at the dreaded 1:00. I turned the key and the entire gauge came up (from memory of the prior odo reading, the odo is working and showing my mileage of the ride, but trip meters were zero) When I tried to set the clock, the gauge went blank again. It's late here so I will take a look tomorrow. In the meantime any suggestions will help. Dan '01 VFR Link to comment Share on other sites More sharing options...
Forum CEO HispanicSlammer Posted January 16, 2017 Forum CEO Share Posted January 16, 2017 Usually it is a bad ground cluster.Sent from my SM-N900V using Tapatalk Link to comment Share on other sites More sharing options...
Member Contributer GOVFR Posted January 16, 2017 Author Member Contributer Share Posted January 16, 2017 Thanks, will start looking. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.