shonga Posted December 4, 2016 Share Posted December 4, 2016 I don't get spark on all sides. When i tested the wires of my CDI using a fluk multi meter i get positive on the black wire and negative on the green and red wire what do you guys think is the problem? red probe touching black wire and black probe touching the red wire i get 11.8V red probe touching red wire and black probe touching the black wire i get - 11.8V red probe touching black wire and black probe touching the green wire i get -11.2V red probe touching green wire and black probe touching the black wire i get 11.2V Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.