jimpanzer07 Posted October 10, 2015 Share Posted October 10, 2015 Hello all, just got a new 14 Interceptor 800 and love the bike - very smooth, perfect shifting, great brakes, quality and v4 sound. Already ordered the 2 bros carbon slip on and claims 6+ hp and 6 lbs lighter. Are there any other areas to shave some heft as the bikes weight is its biggest disadvantage. Also has anyone done any major engine mods? Hotter cams, higher compression, fueling . It seams like Honda has the engine in a very mild state of tune and should be able to get 20 more hp without messing with reliability too much. In a perfect world 20 more hp and 20lbs lighter Link to comment Share on other sites More sharing options...
fatshoutybloke Posted October 10, 2015 Share Posted October 10, 2015 The carbon can is the best single change for weight loss, apart from that the bike's weight is mostly in that lump of an engine, big frame and solid swingarm. Lot more difficult to do anything about those. And in my bike's case, 200lb+ of pilot. Link to comment Share on other sites More sharing options...
Member Contributer Egg on Leggs Posted October 10, 2015 Member Contributer Share Posted October 10, 2015 What is your BMI? Link to comment Share on other sites More sharing options...
fatshoutybloke Posted October 10, 2015 Share Posted October 10, 2015 BMI 29. height 5'10" chest 44", waist 35". What has that to do with losing weight off the bike? Link to comment Share on other sites More sharing options...
Member Contributer fink Posted October 10, 2015 Member Contributer Share Posted October 10, 2015 :laugh:My answer would be the same as eggs. Whilst the question was for the bike, rider weight would make a big difference too. If you wanting to take it to extremes. First loss would be the ABS system that must weigh a few pounds, grab handles if fitted, smaller battery, centre stand. Link to comment Share on other sites More sharing options...
Member Contributer Egg on Leggs Posted October 10, 2015 Member Contributer Share Posted October 10, 2015 fatshoutybloke, on 10 Oct 2015 - 3:39 PM, said:BMI 29. height 5'10" chest 44", waist 35". What has that to do with losing weight off the bike? I lost 30 lbs of the weight of my bike this year and it cost me nothing and I don't have to undo my trousers to get them on or off anymore. Link to comment Share on other sites More sharing options...
fatshoutybloke Posted October 10, 2015 Share Posted October 10, 2015 Link to comment Share on other sites More sharing options...
phatstorage Posted October 11, 2015 Share Posted October 11, 2015 As far as moar powah goes, Ive gone with a k&n air filter on top of the after market can, I've added a pc5 but am yet to dyno run the bike so just losing fuel quicker than before. Removing too much stuff would reduce practicality and may as well be a cbr600 IMO. I've added weight, givi trekker 52ltr side boxes and the under seat is jammed with stuff, still give most sunday riders a surprise on roundabouts. Titanium tank carbon fiber panels and short under engine exhaust would be nice though. Link to comment Share on other sites More sharing options...
MrGrumpy83 Posted October 12, 2015 Share Posted October 12, 2015 Others have said it - your own weight can make a big difference. A real world example - I've lost 20kg in the last 6 months, cost me nothing, and there's so many other benefits stemming from it besides reduction of the overall weight on the bike. Losing 20kg off the bike itself would be extremely difficult. Of course, if you're not carrying a few extra pounds, then this is totally and utterly irrelevant and you may disregard my post entirely ;) Link to comment Share on other sites More sharing options...
gotpowr Posted October 12, 2015 Share Posted October 12, 2015 I knew a guy who was so conscious of weight in the car he was drag racing, he was cutting brackets and damn near close to taking critical safety equipment to save less than a pound. He was also about 300 lbs and would scarf about 6 cheeseburgers (not small ones like White Castle) in a sitting.... I can understand taking weight off the bike if possible, but exactly as everyone said, if rider weight is possible, it's the easiest to take off. It's also the best since it's weight up high. That being said, I could stand to lose a few pounds (or some more than a few ), but I still dropped the stock exhaust for a lightweight carbon can, for sound, looks, and weight savings. Link to comment Share on other sites More sharing options...
jimpanzer07 Posted October 12, 2015 Author Share Posted October 12, 2015 Ok, I am going to drop 10 lbs of fat off myself but still looking for more options for vfr. Does anybody make a lightweight bracket for pipe mount that eliminates passanger peg? How about a cowl? Eliminating the passanger pegs, grab handles and a fender eliminator would pair a fair amount of lard up high on the bike and further enhance handling. Link to comment Share on other sites More sharing options...
Shinigami Posted October 13, 2015 Share Posted October 13, 2015 It's the frame and engine. That V4 is dense, and it's never going to make much more power than how Honda served it up, without spending a third of the bike value on hop-up mods that eliminate one of the VFR's greatest assets- anvil-like durability. I mean, just how many of those supercharged 5/6th gens are still out there running well? Link to comment Share on other sites More sharing options...
Member Contributer Rectaltronics Posted October 13, 2015 Member Contributer Share Posted October 13, 2015 Sounds like you want a CBR with a V-4 motor? I try not to judge. Well, wait, let me re-phrase that. I saw a 6th gen with a shorty exhaust this morning. The little noise-maker pointed about 45 degrees out from by the rider's heel. The bike looked absurd with those big empty spaces where the underseat pipes used to be. Yech. There is not a big aftermarket for VFR engine internals. If any. Power Commander modules are available. If you get a PC or equivalent, plan on spending a day at a shop with a dyno for best results. Of course nothing is stopping you from being a pioneer. If you're willing to tear apart the motor, just shop around for someone to do the cams, etc. If you throw enough money at someone I'm sure they'll be willing. There was an outfit called A&A Performance. They made a supercharger kit for 6th gen VFRs but seem to have disappeared. A 160 HP VFR would certainly be LOLz. At least until the whirly bits get launched. Maybe you can find the remnants of an old kit and try to fit it. As for weight, the question becomes what do you expect from the weight loss. Speed? Acceleration? Quicker handling? If you knock 20 lbs off of the bike and factor in the weight of rider and gear you end up with less than a 3% improvement in power to weight ratio, which will give you some improvement in performance until speeds climb to the point that aerodynamic drag and real honest to goodness horsepower are in direct competition. A touch better acceleration and you may or may not notice the difference in handling unless you're tossing the bike around a lot. Lighter wheels do more in that area. Leave the pillion seat and grab handles at home, dispense with the toolkit, take off the centerstand if you have the DLX. Yes, a lithium battery is a good idea too. After that you'll be buying lighter wheels and going to town with drills, saws and angle grinders. I'm with all the people here who realize that for many of us, the biggest hits to horsepower/weight ratio often come from our own bodies, and you don't need to spend money or start sawing stuff off your bike to improve that. If you shop for engine work, let us know how your adventure progresses. Link to comment Share on other sites More sharing options...
fuelex Posted October 13, 2015 Share Posted October 13, 2015 The easiest way to keep the weight down on the VFR is to not fill the tank. Unleaded weighs about 0.737kg per litre so that's about 15.85kg for a full tank. All that weight sits high up. If you're not doing long journeys or don't mind stopping more regularly then half filling the tank will drop the weight by nearly 8kg, which must be the cheapest way of losing weight and all from the highest point on the bike. And because the bike's lighter you'll actually get marginally better fuel economy too. Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
Member Contributer fink Posted October 13, 2015 Member Contributer Share Posted October 13, 2015 Seriously if your looking for a drastic weight loss then you have bought the wrong bike. Could someone explain the need to loose 20Lbs off the bike?? I used to be able jump between 3 bikes a Cbr600 F3, a ZX9r and the viffer. All 3 different bikes in their own way but could have just as much fun on all of them. Don't have any problems chucking them about. Link to comment Share on other sites More sharing options...
Member Contributer Rectaltronics Posted October 13, 2015 Member Contributer Share Posted October 13, 2015 Could someone explain the need to loose 20Lbs off the bike?? I used to be able jump between 3 bikes a Cbr600 F3, a ZX9r and the viffer. All 3 different bikes in their own way but could have just as much fun on all of them. Don't have any problems chucking them about. It sounds impressive at the pub? Link to comment Share on other sites More sharing options...
Member Contributer Rectaltronics Posted October 14, 2015 Member Contributer Share Posted October 14, 2015 See this post: http://www.vfrdiscussion.com/forum/index.php/topic/78919-alloy-side-stand-thanks-to-gig/?p=962700 Check the rest of the thread while you're at it. Link to comment Share on other sites More sharing options...
Member Contributer fink Posted October 14, 2015 Member Contributer Share Posted October 14, 2015 No not at the pub at all, well wouldn't impress any of the bikers in there . Sadly Cbr and ZX9 were sold as new house and commitments meant didn't have room for them or free time Forgot to include the Pan as well, but she doesn't really count as it was sold before I got the 9. Link to comment Share on other sites More sharing options...
jimpanzer07 Posted October 16, 2015 Author Share Posted October 16, 2015 I just want the bike that Honda should have would have could have built, its a great bike! Knocking 20lbs. off any motorcycle will improve handling dramatically .The 2 bros carbon slip on is a must have, 6lbs lighter and 6 more hp with really great sounds when going thru the gears at full tilt. The stock muffler is a boat anchor and makes bike sound like a sewing machine. If you ride this bike like a 600 - high revs its pretty dam sporty and handles great. I am surprised that there are very few aftermarket parts for the bike though. Will post some pics soon - happy riding Link to comment Share on other sites More sharing options...
Member Contributer Rectaltronics Posted October 17, 2015 Member Contributer Share Posted October 17, 2015 The aftermarket for VFRs has always been fairly sparse in terms of performance goods. If you look through the forums here, yeah, you'll see the usual whinging about weight, or the effort it takes to perform valve clearance work on VTEC motors, and most power related stuff is limited to relatively easy things like swapping exhaust components (there's the LPSL goofballs but that's another subject entirely), experimenting with airbox equipment and installing remapping widgets like Power Commanders. In the grand scheme of things it seems to me that most VFR owners aren't that eager to pull their motors for major work and seem to be more interested in farkles, storage options, or fixing those g******** mother-f****** rectifier/regulators and related electrical gremlins. Which I'm sure would also plague the owners of the more sport oriented machines... er, if folks owned 'em long enough to get there. I have a friend here in NYC with a 1986 VFR that had 200,000 miles on it as of 2012. Looks like hell but really, how many late eighties CBRs do you see with 200K-plus on 'em? Conversely, how many VFRs do you see at the local raceway? Probably about as many as you see FJRs, I'm guessing... The very few serious power related offerings for VFRs have gone down in flames. Big bore kits, turbo and supercharging, etc. I think there's just not enough market to keep those ventures alive. Passion is great but nobody wants to work for free, or worse. When it comes right down to it, if you really want to stick with Big Red but you're pining for power and lightness, you could spend the same coin on a CBR1000RR today, get 50% more horsepower, knock something like 80 lbs off the weight and get more suspension adjustability too. Or you can be that passionate pioneer. Link to comment Share on other sites More sharing options...
Member Contributer windyrun Posted October 17, 2015 Member Contributer Share Posted October 17, 2015 If a cbr 1000 is what you migrate to you can consider adjustable clip ons to raise the bar height an inch or two as well as adjustable rear sets. These two changes can make it a bit closer to the ergos of the vfr and still have honda, power, and light weight as well as more adjustment in suspension. Link to comment Share on other sites More sharing options...
Member Contributer fink Posted October 17, 2015 Member Contributer Share Posted October 17, 2015 Why not buy a Cbf then its basically a fireblade engine with the above. Link to comment Share on other sites More sharing options...
Member Contributer Rectaltronics Posted October 17, 2015 Member Contributer Share Posted October 17, 2015 Why not buy a Cbf then its basically a fireblade engine with the above. CBF1000? Much less power and torque, and weighs in at a healthy 490 dry. Also not currently in production as far as I know. Link to comment Share on other sites More sharing options...
Member Contributer fink Posted October 18, 2015 Member Contributer Share Posted October 18, 2015 Why not buy a Cbf then its basically a fireblade engine with the above. CBF1000? Much less power and torque, and weighs in at a healthy 490 dry. Also not currently in production as far as I know. http://www.honda.co.uk/motorcycles/range/street/cbf1000f-2013/overview.html Ok so it an older blade motor which is detuned. Oh, you don't get it across the water. Link to comment Share on other sites More sharing options...
XRM Posted April 18, 2017 Share Posted April 18, 2017 Lithium battery is an easy one! Tyres are the best speed mod! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.