Help
That's awesome Rice! I picked up an 03 VFR800 a few months ago, and immediately knew I had to change the stock sound. I've been looking at aftermarket exhausts, and gutting the stocker. I think that mod is over my head, to be honest with you. I'm in southern NH. Anyone with the capability willing to do it? I'll pay, of course. Thanks.
Gutting 6th Gen Exhaust - The Easy Way. Full gut, cut in one place, no welding required.
#51
intrcptrkd 
- Sport Tourer
- Group: Members
- Posts: 8
- Joined: 02-September 07
- Location:Litchfield NH
- In My Garage::2003 VFR 800
Thank You's: 0
Neutral
Posted 12 October 2007 - 01:51 PM
MultiQuote
#52
billyjackjimbob
- Kentucky "Viffer" Kid
-
- Group: Members
- Posts: 939
- Joined: 18-March 04
- Location:Berea, KY 40403
- In My Garage::07 Honda VFR800 Interceptor 25th RWB
-
Signed Flaf:
Thank You's: 0
Neutral
Posted 12 October 2007 - 01:52 PM
Stop here! Clean out the shavings and put the pipes back on the bike. DO NOT WELD THE END CAPS BACK ON! Put the heat sheilds back on both the sides and ends without the end caps. It will look stock.... I will sound.... BAD @SS! Anyone who heard the RedNeck Express knows of that which I speak.
Kevin
"There is no worse tyranny than to force a man to pay for what he does not want merely because you think it would be good for him."
Robert A. Heinlein
Robert A. Heinlein
#53
Krymoff
- New Member
- Group: Members
- Posts: 1
- Joined: 11-May 10
- Location:Palm Harbor, FL
- In My Garage::VFR800 FI Interceptor 2005 silver
Thank You's: 0
Neutral
Posted 11 May 2010 - 09:32 PM
Thanks a lot for a nice explanation - it's works!
Get mine exhausts gutted right after find these method - great!
now it's sounds right!
Rice, well done, thanks again!
P.S.: just needs to be more intend to go through all stuff what needs to be done anyway - never give up!
;)
Get mine exhausts gutted right after find these method - great!
now it's sounds right!
Rice, well done, thanks again!
P.S.: just needs to be more intend to go through all stuff what needs to be done anyway - never give up!
;)
This post has been edited by Krymoff: 15 May 2010 - 09:59 PM
#54
BearNVa
- Sport Tourer
- Group: Members
- Posts: 8
- Joined: 15-April 10
- Location:Norfolk, VA
Thank You's: 0
Neutral
Posted 14 May 2010 - 09:59 PM
Well I started this task at approx. 6pm EST... I got one side done by 9:30pm.... this shit is not easy!!! The welds inside are a PITA to break loose. However with one side out the sound is OMG!!! It sounds awesome!!
